Alloy 400 is a solid solution binary alloy. Because nickel and copper dissolve in each other in any ratio. It is a single phase alloy.

Duplex Stainless Steel (DSS) refers to ferritic and austenite each accounts for about 50%, generally less phase content also needs to reach at least 30% Stainless

S32304 is a 23% chromium, 4% nickel, molybdenum free duplex stainless steel.Alloy 2304 has corrosion resistance similar to 316L.Its mechanical properties, i.e. yield strength, are

2507 (UNS S32750) is a super duplex stainless steel designed for applications requiring excellent strength and corrosion resistance. 2507 is an alloy of 25% chromium,

 1.4501 is austenite-ferritic steel, also known as super duplex stainless steel, which combines many of the advantages of ferritic and austenitic steels.It provides enhanced resistance

Stainless steel 347 UNS S34700 has good mechanical properties, suitable for use in high temperature environment. SS 347 also has good intergranular corrosion resistance at

Sx310 is a high-alloy austenitic stainless steel intended for high-temperature applications.The high chromium and nickel content gives the steel excellent oxidation resistance and high strength

Sx309 is a highly alloyed austenitic stainless steel with excellent oxidation resistance, high temperature strength and creep resistance.The lower nickel content improves the high-temperature sulfur

321 austenitic stainless steel has good corrosion resistance in the atmosphere, which is widely used in petrochemical, electric power, bridge and automobile industries.But the “rust”

Most of 2507 duplex steel tubes are produced by cold drawing.This alloy has higher yield strength and lower ductility than austenitic steel, so the manufacturer