1. thermal spraying Thermal spraying is the use of some heat source to heat the coating material to molten or semi-molten state, and with the help of flame flow and...
Electrical line protection stainless steel hose
Stainless steel instrument line shelter hose, specification: 6mm-25mm; Material: 304 stainless steel /301 stainless steelPurpose: Used as a wire shelter tube for automatic instrument signal. Stainless steel hose for shelving...
High nitrogen stainless steel powder was prepared by atmospheric pressure melting and nitrogen atomization
High nitrogen stainless steel has excellent mechanical properties and corrosion resistance. The preparation method of high nitrogen stainless steel is mainly smelting method and powder metallurgy method, which powder metallurgy...
Improvement of surface technology of 310S heat resistant stainless steel continuous casting slab
310S(0Cr25Ni20) heat resistant stainless steel (typical composition % : 0.05C, 0.70Si, 0.95Mn, 0.025P, 0.006S, 24.5Cr, 19.3Ni) is a high chromium-nickel austenitic stainless steel, which has excellent corrosion resistance in oxidized...
Factors affecting bright annealing of stainless steel tubes
The brightness of stainless steel tube after annealing determines the quality of the product. There are also many influencing factors. This paper lists about 5 important factors for reference.1. Whether...
Reuse and processing of waste stainless steel
For the smelting of stainless steel, the general use of "no oxidation method", "oxidation method" and "return blowing oxygen method" smelting process, and the use of "return blowing oxygen method",...