As of November 21, the main stainless steel closed up 1.06% to 16,680 yuan/ton. The supply side's new production capacity is climbing, the output is increasing, and the supply pressure...
Common Treatment Processes for Stainless Steel Surfaces
1. Surface Drawing Treatment Metal wire drawing is a prevalent decoration method in life. It can be made into straight lines, threads, corrugations, random patterns, and spiral patterns. This surface...
Thermal spraying and electroplating to improve wear resistance of stainless steel
1. thermal spraying Thermal spraying is the use of some heat source to heat the coating material to molten or semi-molten state, and with the help of flame flow and...
Electrical line protection stainless steel hose
Stainless steel instrument line shelter hose, specification: 6mm-25mm; Material: 304 stainless steel /301 stainless steelPurpose: Used as a wire shelter tube for automatic instrument signal. Stainless steel hose for shelving...
High nitrogen stainless steel powder was prepared by atmospheric pressure melting and nitrogen atomization
High nitrogen stainless steel has excellent mechanical properties and corrosion resistance. The preparation method of high nitrogen stainless steel is mainly smelting method and powder metallurgy method, which powder metallurgy...
Improvement of surface technology of 310S heat resistant stainless steel continuous casting slab
310S(0Cr25Ni20) heat resistant stainless steel (typical composition % : 0.05C, 0.70Si, 0.95Mn, 0.025P, 0.006S, 24.5Cr, 19.3Ni) is a high chromium-nickel austenitic stainless steel, which has excellent corrosion resistance in oxidized...
Factors affecting bright annealing of stainless steel tubes
The brightness of stainless steel tube after annealing determines the quality of the product. There are also many influencing factors. This paper lists about 5 important factors for reference.1. Whether...
Reuse and processing of waste stainless steel
For the smelting of stainless steel, the general use of "no oxidation method", "oxidation method" and "return blowing oxygen method" smelting process, and the use of "return blowing oxygen method",...
Stainless steel tube authenticity identification method
Magnetic test is the simplest way to distinguish between annealed austenitic stainless steel and ferritic stainless steel. Austenitic stainless steel is a non-magnetic steel, but it will be slightly magnetic...
How are stainless steel products corroded
With the development of society, stainless steel products have been derived from many kinds. Different kinds have different properties, and different properties of stainless steel products are used in different...