Stainless Steel Strip

Grade: 201/304/316L/310S/ 2205 and so on
Surface: No.1, 2B, No.4, No.6(HL), snow brushed
Standard: ASTM A240
Thickness: 0.05mm-0.3mm
Width: 10mm-610mm

With years of experience in stainless steel, Jianglin became one of the China’s most advantageous manufacturers for stainless steel strip.
Our stainless steel strip/tape is used in all sorts of applications from chemical filter, corrugated stainless steel pipe, stainless steel hose, textile heald and hose clamp. You can purchase the strip in a wide range of standard and specialty stainless steel grades. These products come in a wide range of sizes, up to 1,540 mm wide and up to 0.01 mm thick. You can customize the stainless steel tape. We can meet your special needs.

Property of Stainless Steel Strip

Chemical Analysis (%) Specified
Grade	C	Si	Mn	P	S	Cr	Mo	Ni	Other
253MA	1.1 – 2.0	0.05-0.10	8	0.04	0.03	20.0 – 22.0		10.0 – 12.0	N 0.14-0.20Ce 0.03-0.08
301	0.15	0.75	2	0.045	0.03	16.0 – 18.0		6.0-8.0	N 0.10
302HQ	0.03	1	2	0.045	0.03	17.0 – 19.0		8.0 – 10.0	Cu 3.0-4.0
303	0.15	1	2	0.2	0.15	17.0 – 19.0		8.0-10.0
304	0.08	0.75	2	0.045	0.03	18.0 – 20.0		8.0 – 10.5	N 0.10
304L	0.03	1	2	0.045	0.03	18.0- 20.0		8.0- 12.0	N 0.10
304H	0.04 – 0.10	0.75	2	0.045	0.03	18.0-20.0		8.0 – 10.5	N 0.10
309s	0.08	1	2	0.045	0.03	22.0 – 24.0		12.0 – 15.0
310	0.25	1.5	2	0.045	0.03	24.0- 26.0		19.0 -22.0
316	0.08	0.75	2	45	0.03	16.0- 18.0	2.0-3.0	10.0-14.0	N 0.10
316L	0.03	0.75	2	0.045	0.03	16.0 – 18.0	2.0 – 3.0	10.0 – 14.0	N 0.10
317L	0.03	0.75	2	0.045	0.03	18.0- 20.0	3.0 – 4.0	11.0 – 15.0	N 0.10
321	0.08	0.75	2	0.045	0.03	17.0 – 19.0		9.0 – 12.0	N 0.10Ti=5x(C+N) min.0.70 max.
347	0.08	0.75	2	0.045	0.03	17.0 – 19.0		9.0 – 13.0	Nb 10xC min. 1.01.0 max
904L	0.02	1	2	0.045	0.035	19.0 – 23.0	4.0-5.0	23.0 – 28.0	Cu 1.0-2.0

Mechanical Properties Specified
Grade	Common form	Treatment	Tensile strength MPa(min.)	Yield strength (0.2% offset) MPa (min.)	Elongation % in 50mm (min.)	Hardness (max) (Note 2)
253MA	Plate	Annealed	600	310	40	95 HRB
301	Sheet or Coil	Annealed 1/4 to full hard	515 860 – 1275	205 515 – 965	40 25-9	95 HRB
302HQ	Wire 2.5mm dia and over	Annealed Lightly drawn	605 max 660 max	–	–	–
303	Bar	Cold finished Condition A	–	–	–	262 HB
304	Plate	Annealed	515	205	40	92 HRB
304L	Plate	Annealed	485	170	40	88 HRB
304H	Plate	Annealed	515	205	40	92 HRB
309s	Bar	Annealed	515	205	40	95 HRB
310	Plate	Annealed	515	205	40	95 HRB
316	Plate	Annealed	515	205	40	95 HRB
316L	Plate	Annealed	485	170	40	95 HRB
317L	Plate	Annealed	515	205	40	95 HRB
321	Sheet	Annealed	515	205	40	95 HRB
347	Plate	Annealed	515	205	40	92 HRB
904L	Plate	Annealed	490	220	35	70 – 90 NRB typical