Home » stainless_products » black mirror stainless steel sheet

black mirror stainless steel sheet

Color Type： Golden/Bronze/Red and other customized

Surface：8K/No.4/HL/Embossed

Thickness: 0.3-3.0mm

Pallet:1.2-2MT
Average delivery time: 20-25 days

Basic Specification

Black Mirror stainless steel sheet is a widely used decorative industry. It is produced from the PVD process. The Ti powder will be evenly placed on the surface of stainless steel. Normally, the mirror stainless steel sheet is used as base material. Based on the designer’s choice, there are more colors, golden mirror, champaign mirror, brushed gold, and so on.

Besides, the etching process is also widely used to form a different pattern. Customized pattern design is available.

Video

Technnical Data

ASTM A240/JIS Standard 4304

3.1 MTC is available once order confirmed，all of our products are conformed with JIS G4304 and ASTM A240 standard.

ASTM A240

JIS 4304

Available Size

Available Grades

ASTM A240

ASTM A240 Chemical Standard

Steel Grade	Ni% Max.	Cr% Max.	C% Max.	Si% Max.	Mn% Max.	P% Max.	S% Max.	Mo% Max.	Ti% Max.	Other
S30400	8.0~10.5	17.5~19.5	0.07	0.75	2	0.045	0.03	–	–	N: 0.1 Max.
S30403	8.0~12.0	17.5~19.5	0.03	0.75	2	0.045	0.03	–	–	N: 0.1 Max.
S31603	10.0~14.0	16.0~18.0	0.03	0.75	2	0.045	0.03	2.0~3.0	–	N: 0.1 Max.
S43000	0.75	16.0~18.0	0.12	1	1	0.04	0.03	–	–	–

ASTM A240 Mechanical Standard

Steel Grade	N/mm 2 MIN.	N/mm 2 MIN.	% MIN.	HRB MAX.	HBW MAX.	Bendability:	Bendability:
	Tensile Stress	Proof Stress	Elongation	Hardness	Hardness	Bending Angle	Inside Radius
S30400	515	205	40	92	201	No Require	–
S30403	485	170	40	92	201	No Require	–
S31603	485	170	40	95	217	No Require	–
S43000	450	205	22A	89	183	180°	–

JIS 4304

Chemical Standard

Steel Grade	Ni% Max.	Cr% Max.	C% Max.	Si% Max.	Mn% Max.	P% Max.	S% Max.	Mo% Max.	Ti% Max.	Other
SUS304	8.0~10.5	18.0~20.0	0.08	1	2	0.045	0.03	–	–	–
SUS304L	9.0~13.0	18.0~20.0	0.03	1	2	0.045	0.03	–	–	–
SUS316L	12.0~15.0	16.0~18.0	0.03	1	2	0.045	0.03	2.0~3.0	–	–
SUS430	0.6	16.0~18.0	0.12	0.75	1	0.04	0.03	–	–	–

Mechanical Standard

Steel Grade	N/mm 2 MIN.	N/mm 2 MIN.	% MIN.	HRB MAX.	Bendability:	Bendability:
	Tensile Stress	Proof Stress	Elongation	Hardness	Bending Angle	Inside Radius
SUS304	520	205	40	90	No Require	–
SUS304L	480	175	40	90	No Require	–
SUS316L	480	175	40	90	No Require	–
SUS430	420	205	22	88	180°	1.0 time the thickness

ASTM A240 Chemical Standard

Steel Grade	Ni% Max.	Cr% Max.	C% Max.	Si% Max.	Mn% Max.	P% Max.	S% Max.	Mo% Max.	Ti% Max.	Other
S30400	8.0~10.5	17.5~19.5	0.07	0.75	2	0.045	0.03	–	–	N: 0.1 Max.
S30403	8.0~12.0	17.5~19.5	0.03	0.75	2	0.045	0.03	–	–	N: 0.1 Max.
S31603	10.0~14.0	16.0~18.0	0.03	0.75	2	0.045	0.03	2.0~3.0	–	N: 0.1 Max.
S43000	0.75	16.0~18.0	0.12	1	1	0.04	0.03	–	–	–

ASTM A240 Mechanical Standard

Steel Grade	N/mm 2 MIN.	N/mm 2 MIN.	% MIN.	HRB MAX.	HBW MAX.	Bendability:	Bendability:
	Tensile Stress	Proof Stress	Elongation	Hardness	Hardness	Bending Angle	Inside Radius
S30400	515	205	40	92	201	No Require	–
S30403	485	170	40	92	201	No Require	–
S31603	485	170	40	95	217	No Require	–
S43000	450	205	22A	89	183	180°	–

Available Size

Thickness	Width	Length	Surface Finish
15~85 mm	914, 1219, 1524 mm	3048, 6069 mm Max.10M	Black
3~8 mm	20~2000 mm	3048, 6069 mm Max.10M	No.1
8 up ~ 60 mm	30~2000 mm	Max. 6096 mm	No.1
0.23-3.0mm	30-1524-2000mm	Max. 10M	2B/No.4/HL/8K

Available Grades

Great Britain BS970	U.S.A AISI/SAE	Germany W-Nr Din	Italy UNI	Japan JIS	France AFNOR	Spain UNE
17/4PH	ASTM A564 Grade 630	50049 1.4542	–	–	Z7CNU 17-04	–
303S31	303	1.4305 X10CrNiS18-9	X10CrNiS1809	SUS303	Z8CNF 18-09	F.5308
304S11	304L	1.4307 1.4306 X10CrNiS18-9	X3CrNi1811 X2CrNi1811	SCS19 SUS304L	Z1CN18-12 Z2CN18-10	F.3503
304S15	304	1.4301 X5CrNi1810	X5CrNi1810	SUS304	Z4CN19-10FF Z5CN17-08	F.3504
316S31	316	X5CrNiMo17133	X5CrNiMo1713 X8CrNiMo1713	SUS316	Z6CND18-12-03	–
316S11	316L	1.4404 X2CrNiMo17132	X2CrNiMo1713 X8CrNiMo1713	SUS316L	Z2CND17-12 Z2CND18-13	F.3533 F.3537
321S31	321	1.4541 X6CrNiTi18-10	X6CrNiTi1811	SUS321	Z6CNT18-10	F.3523
310	310 310S	1.4845 X12CrNi25-21	X6CrNi2521	SUH310 SUS310S	Z8CN25-20 Z12CN25-20	–
416S21	416	1.4005 X12CrS13	X12CrS13	SUS416	Z11CF13	F.3411
420S29	–	1.4024 X15Cr13	–	SUS410J1	Z13C13	F.3415
420S37	420	1.4021 X20Cr13	X20Cr13	SUS420J1	Z20C13	F.3402
420S45	420F	1.4028 1.4034 X30Cr13	(G)X30Cr13	SUS420J2	Z30C13 Z33C13	F.3403
410S21	410	1.4006 1.4000 X12Cr13	X12Cr13 X109Cr13	SUS410	Z10C13	F.3401
431S29	431	1.4057 X20CrNi172	X16CrNi16	SUS431	Z15CN16-02	F.3427

PVC Film

PVC film is one of the most important factor when purchasing stainless steel material. Basically, 3 types of PVC films are typically applied.

PE50/PE80 black and white film

This is the most widely used film, the thickness normally ranges from 50 micron to 80 microns. There will not be any special function except protection.,

Laser Film(Novacel 4228)

Laser cutting is often applied as a downstream processing. Laser film is a film that can undertake high temperature. If clients apply the wrong pvc, after laser cutting, the pvc will be wrinkled and sticky to the surface.

Transparent Film

There are normally 2 types of blue transparent film, one is the for deep drawing, another one is normal protection film.

Package

Stainless Steel sheet/Plates Packing and Loading Solution

Film Attaching

The edge part should be clean and slit, no residues left.

Back side kraft paper

To make sure there is less moisture going into the pallet, water proof kraft paper should be applied.

Standard sheet package

A layer of wooden plate will be put on the top of the pallet. And 3*2 steel strip will be applied.

Block and bundles

Wooden blocks and bundles will apply on the loading of the pallets.

Top locating

If there are too many pallet in one column，the top part also need be strengthened.

Wooden box package

For stainless steel mirror sheet, we can also apply wooden box.

Advantage

01 Thickness Tolerance

Normally, different mills will apply 3 types tolerance, like 1.0mm, there will be 0.91-0.92mm/0.94-0.96mm/ 0.98-1.01mm. 3 stages to apply for different application.