Stainless Steel 309H Sheets is an alloy of iron, further classified as an austenitic stainless steel.SS 309H Sheets is typically furnished in the annealed condition. Alloy 309H Coils has some other features to offer such as precisely designed, rust proof, optimum finish, high strength, low maintenance, enhanced service life, and more.
316Ti Stainless Steel Sheet/Plate can be used for extended periods at elevated temperature without compromising its corrosion resistance. However, its high temperature resistance is also compounded by its titanium content., which allows these 316Ti Stainless Steel to be immune to precipitation at these temperatures.
Alloy 321 (UNS S32100) is a titanium stabilized austenitic stainless steel with good general corrosion resistance. It has excellent resistance to intergranular corrosion after exposure to temperatures in the chromium carbide precipitation range of 800 – 1500°F (427 – 816°C). The alloy resists oxidation to 1500°F (816°C) and has higher creep and stress rupture properties …
Alloy 2205 (UNS S32305/S31803) with 22% Cr，3% Mo, 6% Ni, and N, has a great corrosion resistance especially to stress corrosion. With Duplex property, it has higher strength than austenitic stainless. Compared with 316L, 2205 duplex stainless steel plate has a better corrosion resistance in all corrosive media under -50°F/+600°F temperature range . The yield …
Alloy 2205 (UNS S32305/S31803) Duplex stainless plate Read More »
Stainless Steel Sheet/Plate 316 Annealed is normally used in natural gas/petroleum/oil, aerospace, food and beverage, industrial, cryogenic, architectural, and marine applications. 316 stainless has high strength and excellent corrosion resistance, including in marine or extremely corrosive environments. It is stronger, though less malleable and machinable than 304, 316 maintains its properties in cryogenic or high …
310S stainless steel sheet(plate) has superior high temperature resistance, weldability at high temperature, and is mostly used for high temperature structure. It is the first choice for high temperature applications.
Grade 440C stainless steel is a high carbon martensitic stainless steel. It has high strength, moderate corrosion resistance, and good hardness and wear resistance. Grade 440C is capable of attaining, after heat treatment, the highest strength, hardness and wear resistance of all the stainless alloys. Its very high carbon content is responsible for these characteristics, which …
310 is a highly alloyed austenitic stainless steel used for high temperature applications. The high chromium and nickel contents give the steel excellent oxidation resistance and excellent strength at high temperatures. This grade is also very ductile and has good weldability enabling its widespread usage in many applications.
Type 430 can be rolled to various tempers. Contact Ulbrich Technical Services if tempered properties are required. Type 430 is a chromium ferrite stainless steel with moderate corrosion and heat resistance. It is nonhardenable by heat treatment. Type 430 is magnetic and exhibits good ductility. It can be readily formed into many desired shapes.
Type 420 is a martensitic stainless steel that provides good corrosion resistance similar to 410 plus increased strength and hardness. It is magnetic in both the annealed and hardened conditions. Maximum corrosion resistance is attained only in the fully hardened condition. It is never used in the annealed condition.
Type 410 is a martensitic stainless steel that provides good corrosion resistance plus high strength and hardness. It is magnetic in both the annealed and hardened conditions. A wide range of properties can be achieved with different heat treatments. Applications requiring moderate corrosion resistance and high mechanical properties are ideal for this alloy.
Alloy 304/304L (UNS S30400/S30403) is the most widely utilized “18-8” chromium-nickel austenitic stainless steel. It is an economical and versatile corrosion resistant alloy suitable for a wide range of general purpose applications. It is common practice for 304L to be dual certified as 304 and 304L. The low carbon chemistry of 304L combined with an …
Jianglin steel, Yuanjiabao, Chagugang county, Wuqing District, Tianjin
© Copyright 2022 Jianglin Stainless All right reserved.
Need some help? Just leave your question to Bob
Need some help? Just leave your question to Lisa
Need some help? Just leave your question to Bella
Need some help? Just leave your question to Lean
