Stainless Steel Strip
Yearly output:100,000MT
Available surface: 2B/BA/No.4/8K
Standard: ASTM A240
Stainless Types
Stainless Grades
Stainless Surfaces
All precision strip is produced by our 20-roll Sendzimir Mill, which highly guarantee the surface status.
Normally, for 24 tons production schedule is around 10-15 days.
For international buyers, if clients order is less than one container, we will apply wooden box. meanwhile, we will double check with client whether they need eye to sky or eye to wall.
Our coil ID has 4 choices, 250mm/300mm/400mm/508mm
Our minimum thickness is 0.05mm, maximum width 710mm
Expertised in precision strip
we are dedicated in precision strip manufacture. Our material origin mainly from ZPSCO.
Detail Matters of stainless strip
Coil ID
250/300/400/508mm coil ID is available from our factory. we guarantee the coil ID can suit clients’ machinery.
Chamber Rate
Chamber Rate is a key factor affecting the welding tube process, we guarantee the chamber rate is lower than
Bur Level
Bur level is well controlled to less than 5%. However, some clients need deburring service and round edges, we can provide this service.
Bundling direction
When opening the slit strip, if people can know which direction the strip is bundled, it will be much easier to load the material.
Coil Separator
for small child coils,especial for package “eye to sky”, between each and every child coil, there must be some wooden stick to separate each child coil.
Package method
For precision strip, wooden box will be applied to protect the strip from being damaged.