Uncoiling machine, also known as uncoiling leveling machine, uncoiling leveling production line, in the metal processing industry, the uncoiling machine is divided into three kinds, namely:
1. Uncoiling, leveling and shear production line
2. Uncoiling and leveling slitting production line
3. Uncoiling, leveling, longitudinal shear, coiling, fixed length transverse shear composite line
According to the different metal plate, common stainless steel bisector machine, steel plate machine, aluminum plate machine, copper plate machine. The technical parameters that should be paid attention to are as follows:
1, processing thickness: according to the needs of customers, the thickness of the metal stainless steel plate requirements are different, so each opening machine has the upper and lower limits of processing thickness, more than will cause poor shear, or even damage to the tool
2, processing weight: according to the weight of the customer coil, the importance of the load of the uncoiler is not the same, so the uncoiler generally has an upper limit, if the steel coil is overweight, the feeding car can not operate, or even cause damage to the cylinder;
3, processing width: the width of the coil is not the same according to the requirements of customers, generally have upper and lower limits, the upper limit can not be rolled, the lower limit can not be in the middle;
4, processing length: coil processing after the length requirements are also limited, generally have upper and lower limits, more than can not stamp material;
5, processing speed: the whole open horizontal cutting line between each host speed also has certain requirements. There are belt speed, uniform speed, speed, mainly affect the processing efficiency;