1. Surface Drawing Treatment Metal wire drawing is a prevalent decoration method in life. It can be made into straight lines, threads, corrugations, random patterns,

1. thermal spraying Thermal spraying is the use of some heat source to heat the coating material to molten or semi-molten state, and with the

Stainless steel instrument line shelter hose, specification: 6mm-25mm; Material: 304 stainless steel /301 stainless steel Purpose: Used as a wire shelter tube for automatic instrument

High nitrogen stainless steel has excellent mechanical properties and corrosion resistance. The preparation method of high nitrogen stainless steel is mainly smelting method and powder

310S(0Cr25Ni20) heat resistant stainless steel (typical composition % : 0.05C, 0.70Si, 0.95Mn, 0.025P, 0.006S, 24.5Cr, 19.3Ni) is a high chromium-nickel austenitic stainless steel, which has

The brightness of stainless steel tube after annealing determines the quality of the product. There are also many influencing factors. This paper lists about 5

For the smelting of stainless steel, the general use of “no oxidation method”, “oxidation method” and “return blowing oxygen method” smelting process, and the use

Magnetic test is the simplest way to distinguish between annealed austenitic stainless steel and ferritic stainless steel. Austenitic stainless steel is a non-magnetic steel, but

With the development of society, stainless steel products have been derived from many kinds. Different kinds have different properties, and different properties of stainless steel

Stainless steel parts in order to achieve the surface quality and machining accuracy requirements, usually using grinding processing method. Due to the high toughness, low

Water is the most important resource for human beings. Due to the expansion of population and the increase of water consumption, fresh water resources are